Certified Application System

Standard Epoxy Coating System

A practical and cost-effective epoxy coating system for concrete floors, ideal when you need clean appearance, basic chemical resistance, and reliable day-to-day performance.

Expected Lifespan 7 to 10 years Depends on: Usage intensity, Periodic maintenance, Execution quality
Total Thickness Total system thickness ranges from 1.1 mm to 1.5 mm, depending on floor condition and usage requirements.
Standard Epoxy Coating

Surface Preparation

We believe 90% of the final result depends on accurate mechanical surface preparation.

1

Inspection

  • Moisture check
  • Crack and joint assessment
  • Substrate hardness verification
2

Mechanical Grinding

  • Remove weak laitance
  • Open concrete pores
  • Improve adhesion strength
3

Dust Removal

  • Industrial vacuum cleaning
  • Final dry wipe before coating

Application Stages

We follow strict engineering standards to maximize adhesion, durability, and system performance.

Epoxy Primer

100-150 microns
  • Seals concrete pores
  • Improves bond strength

Epoxy Putty

300-400 microns
  • Repairs minor defects
  • Levels local uneven areas

Final Epoxy Coats

300-500 microns
  • Color finish
  • Optional anti-slip additive

Why Choose This System?

Protects concrete floors against wear and abrasion.
Resistant to oils and grease.
Resistant to most common chemicals.
Easy to clean and maintain.
Provides a clean, organized final appearance.
Lower cost compared with other epoxy flooring systems.

Common Use Cases

Warehouses Garages Workshops Light-duty factories Electrical rooms Offices Service areas
Starts From
300 EGP / m2
Up to 600 EGP / m2

Full range: 300 to 600 EGP / m2 (approx.)

Final pricing depends on system type, thickness, and floor condition.

• Floor condition • Total area • Number of colors • Required thickness

Technical Considerations

Important Note

Lower resistance under very heavy loads.

Not recommended in areas with continuous heavy industrial traffic or constant movement of large equipment.

Does not withstand very high temperatures or direct thermal shock, so it is not suitable for furnace-like or high-heat industrial environments.

Requires a completely dry substrate.

Standard epoxy is sensitive to moisture and should not be applied on floors with rising damp or water leakage.

Final appearance depends on the condition and profile of the substrate beneath.

Why We Mention These Points

We always match the flooring system to existing substrate type and usage conditions to ensure the best visual and technical performance.

Best-Practice Recommendations

Best for budget-focused projects
Suitable where moderate durability is required

A strong value-for-money option when you need practical protection and a professional finish.

Request a Free Site Visit Phone Consultation